Description

2 MAIN VERSIONS with 3 variations!

Version 1: half deco

Version 2: full display

Extras:

1- Decorations for multicolor

2- Version with holes for paper or fabric

3- Empty version! This is for your creativity!!

STRESS FREE, SUPPORTLESS, USER ECO FRIENDLY!

No waste, no broken parts, no fatal printing errors.

I printed it with my wrost non calibrated filament!

It is easy to repair because there is a printed screw:

no print in place (1 error = full fail), no waste, just repair or change the bad printed or broken part, use the screw and go!

Why did I use hexagons?

Because backlit they have a bright-tech effect that is very cool to see!

But the real important reason is to save plastic also increasing the resistance of the piece: more empty spaces, more thin spaces, but still very resistant.

Commercial license:

Yes, you can print and sell this 3D model.

You can also use it for renderings and video games!

You cannot redistribute the individual model or its parts;

you can only sell physical prints, videogames or renderings.

PRINTING INFO:

I used: Creality K1 MAX + Creality Print slicing software,

I used PETG to try this project.

Hexagon infill (15% or less).

Support: No (there are automatic bridges).

Brim: yes just because my plate was dirty hehe (do not use brim if your plate is clean, you will not need it).

Print speed: my petg was terrible so I printed it very slow (60mm/s is the limit for my old *****ment petg).

:D have a nice summer!

Boost Me for free if you like this project! <3

Create Your Own Hand Fan Full Display

0.2mm layer, 2 walls, 15% infill