This enclosure It is rugged and allows you to use it for many different projects. Included are a variety of enclosures and face plates that allow you to choose a blank cover or create your own design. The panels print separately from the main enclosure and this allows you to put graphics or designs on four sides with multiple colors (multicolor) without slowing down the print time of the whole enclosure. The artwork of the fish (a mud skipper) is my original artwork and is not AI generated. When choosing to use a face plate with artwork, import three color file STLs (Black, Blue, Green) into your slicer as one object.

I printed all parts at .28 mm layer height. Make sure to set the flushing parameters in your slicer to 150% to avoid any color bleed.

Dimensions:

105 mm Long

114.5 mm Wide

51.7 mm High

File name abbreviations:

TP – top plate

FP – front plate

SP – side plate

X0 – no holes

X1 – One, centered 30.2 mm hole

X2 – Two, centered 30.2 mm holes

CX1 – One, centered, countersunk 30.2 mm hole

CX2 – Two, centered, countersunk 30.2 mm holes

Note: Make sure that the output voltage of the system is within an acceptable range. Also, monitor the voltage of your battery so you do not over discharge it.

Filament:

Creality PETG - Black

Sunlu PETG - Sky Blue

Sunlu PETG - Mint Green

Creality PETG - Red

Sunlu High Speed Matte PETG - Orange

Sunlu High Speed Matte PETG - Yellow

These are the parts I used, they’re not affiliate links, so I make no commission when you click on them.

Parts:

#6x3/4"(20mm) Screws x4

https://www.amazon.com/s?k=wood+screws&rh=n%3A16410631%2Cp_n_material_browse%3A17548933011

M2.5x10mm Screws x2

https://www.amazon.com/s?k=screws&rh=n%3A228013

XT60 Male Mountable connector Amass XT60-EM

https://www.amazon.com/XT60E1-M-Mountable-Connector-Multicopter-Control/dp/B088GNFT1F

12awg Stranded Silicone wire (Back and Red). ~6" (~150mm)

https://www.amazon.com/s?k=12+awg+wire

4 Port 12 Volt USB Outlet Cigarette Lighter Socket Panel, Dual PD3.0 and Dual QC3.0 USB Ports Aluminum Car Charger with Voltmeter, Lighted 150W Socket

https://www.amazon.com/Upgraded-Cigarette-Lighter-Aluminum-Voltmeter/dp/B0FB3RBC19

(if you buy this, you do not use the 4X #6 3/4" screws)

12v-24v cigarette lighter socket

https://www.amazon.com/dp/B07FLT2VB6?psc=1&ref_=cm_sw_r_ud_ct_NFZCHWYYBYF8S5FXGMFF

12-24v Dc to USB panel adapter

https://www.amazon.com/dp/B0BCPJJXK7?psc=1&ref_=cm_sw_r_ud_ct_NFZCHWYYBYF8S5FXGMFF_1

3/8" Heat shrink ~2"

https://www.amazon.com/s?k=electrical+shrink+wrap+tubing

Optional

Voltage regulator

https://www.amazon.com/Nilight-Converter-Regulator-Waterproof-Transformer/dp/B0CYQ8X29T

(if you search Amazon for your drill manufacturer and voltage regulator, you might be able to find a combo that has both the voltage regulator and the battery adapter. Make sure it outputs enough amps for your desired purpose.)

Drill battery to DC Adapters

Milwaukee

https://www.amazon.com/s?k=milwaukee+battery+adapter

Dewalt

https://www.amazon.com/s?k=dewalt+battery+adapter

Makita

https://www.amazon.com/Battery-Adapter-Converter-Modified-Robotics/dp/B0CXPW96WK

Ryobi

https://www.amazon.com/KOEZEOI-Adapter-Converter-Terminals-Connector/dp/B0CM3QMLSP

Tools:

Phillips Screwdrivers PH01 and PH002

Flathead Screwdriver (For Removing Plugs)

Soldering Iron

Thank you for viewing my model. I hope you find it helpful. Please pose a picture of your make, I’d love to see what you created!

Disclaimer: Working with batteries and electronics can be dangerous. Print, build, and use this model at your own risk. I accept no liability for any damages that may arise from the proper or improper manufacturing, storage, or use of this model.

Dangle Power - Box For 12v DC Car Cigarette Lighter Sockets

0.28mm layer, 2 walls, 5% infill

0.2mm layer, 2 walls, 15% infill