📱 Desk Tidy Tablet & Phone Charging Stand — Full Description

This practical desk organiser is designed to keep your workspace clean, efficient, and fully charged. The model features a stable base with dedicated slots for both a tablet and a smartphone, positioning devices at an ideal viewing angle while they charge. Integrated cable‑routing channels and cut‑outs help manage wires neatly, reducing clutter and keeping your setup streamlined.

The raised platform and structured compartments provide space for everyday essentials—pens, earbuds, USB drives, or other small accessories—making it a versatile addition to any workstation, bedside table, or kitchen counter. With its clean geometry and functional layout, this stand blends seamlessly into modern setups while offering reliable support for your devices.

🧰 Recommended 3D Print Setup

🖨️ Printer & Material

• Material: PLA or PLA+ for rigidity and easy printing

• Nozzle: 0.4 mm

• Layer Height: 0.2 mm (or 0.16 mm for a smoother finish)

• Walls: 3–4 perimeters

• Infill: 15–25% (Grid or Gyroid)

• Top/Bottom Layers: 4–6

📐 Orientation

• Print flat on the base for maximum stability

• Ensure cable‑routing cutouts face upward in the slicer for clean bridging

🧱 Supports

• Supports generally not required

• If needed, use “support on build plate only” for deeper channels

• Support Density: 10–15%

• Z‑Distance: 0.2–0.24 mm

🌡️ Temperatures

• Nozzle: 200–210 °C (PLA/PLA+)

• Bed: 55–60 °C

• Cooling: 100% after the first few layers

⚙️ Speed & Quality

• Print Speed: 45–55 mm/s

• Travel Speed: 120–150 mm/s

• Retraction: 0.8–1.2 mm (direct drive) or 4–6 mm (Bowden)

• Bridging fan boost recommended for cable slots

🧽 Post‑Processing

• Light sanding on top edges if desired

• Add rubber feet or felt pads to prevent sliding

• Optional: silicone bumpers in device slots for extra grip

DockTidy

0.16mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill