Updated !! V2.3 Dophin Aquarium Pipes V2.3mf

Modified the pippes a bit for btter flow and strength. 2 Versions , 1 Long Pipe with slighly larger than normal holes, which reduces the flow pressure a bit, with build-in stopper.

Shorter Pipe with bigger holes (Print more than one if you need) and also a stopper.

Added a new elbow as well. The 3mf file should have the orientations correctly already.

Reccomend PTEG for printing this .

|If you have questions or comments, let me know

I needed to replace the pipes for my Dophin Aquarium filter, and designed these. This is for the bigger Dophin Canister filters. I have the C1000 verion and it works on that. Connects to 16mm pipe. The attached images show the prints i done with PLA, for testing and it worked 100% without support. I will also print it with Clear PLA and test.

Settings :

Creality K1 Max
0.1 Layer height
3 Wall Loops
Speed i dropped allot - Inner Wall: 160 , Outer Wall 140
For the Elbow i needed support - Normal - Auto

If you have any issues, please let me know, new to designing so let me know if i messed up and i can try to fix.

Dophin Aquarium Filter Pipes (Updated)

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill