Dragon of Negative Attributes

If you know the logo, you know the name. Available and printable in both solid multicolor or individual plates that can be assembled via printable pins.

Just an easy-to-print display piece that shows that you are an exciting person with exceptional taste. Printed in WHITE, RED & BLACK PLA at a layer height of 0.20mm. Print speed is Dependent on preference, as mine is 300mm/s. Fully supportless. Tolerances may vary on a printer to printer basis. Printed on an Ender 3 V3 KE which does not automatically cycle through filaments, so manual filament changes are mandatory if wanting to do a solid multicolored version if running a machine that does not support multicolor prints.

As said earlier, there are different variants available including a solid logo which can either be printed in multicolor or one solid color for painting. The other variants are individual plates that can be pressed together using printable pins, including a jaw piece that can either be printed with the "BD" on it already or with the "BD" being separately printed and pressed into the jaw.

Not a picky print so print settings are all pretty much foolproof. I hope you enjoy this print and keep supporting all 3D designers big and small.

Dragon Logo

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill