Drawer for the CFS rack designed by Layerforged3d

Creality Cloud Print Different - CFS Stand - Main Body From LionWei https://m.crealitycloud.com/en/model-details/69b0fe4dae5534c9fe748055

Model can accommodate x2 completed drawers

Standard configuration with notched front panel and perimeter gap filler:

Use all 4 panels (A,B,C,D)

Glue panels together with superglue and allow to cure fully before using.

Alternate configuration: Flat front, without cutout or perimeter gap filler (must drill hole for drawer pull knob, not included, but I recommend this model: Creality Cloud Print Different - Door handle From KC https://m.crealitycloud.com/en/model-details/645531ca58f57701c94b3e53 )

Use parts A (x2) and B (x2)

Glue panels together with superglue and allow to cure fully before using.

*optional: use a plastic welder with heat set inserts to the seams after glue has set to increase rigidity. I use this model: https://a.co/d/0hgTfRY2

A little dab of grease on the rail grooves will aide in smooth operation. If it still feels too tight, scale the model down to 98.9% (uniform)

Uncut drawer included in files, however due to the size, it will not fit most printers.

If you like this model, please like and boost.

I love to see your makes, and Remixes are always welcome. Creativity is what makes this community great!

And please give a special thanks to LionWei for designing the CFS stand that utilizes these drawers. In my opinion it’s the best single CFS stand with storage solutions available.

Drawers for CFS stand By Layerforged3d

0.2mm layer, 2 walls, 15% infill