Multi-Color Filament Angle Calibration Disk (45 mm)

Dial in the best color transition angle for dual-color and tri-color filaments with this compact calibration disk. A quick test print helps you preview how colors shift with rotation, so you can confidently orient future models before printing larger parts.

✨ Key features

15° angle markers on the top-left side for fast visual alignment

Clear numeric indicators (0°, 45°, 90°) with matching guide lines on the top-right side

Hollow center design to reduce material usage and print time

“PLA” marking in the center for easy material identification

Clean, readable geometry designed for consistent color separation

📐 Dimensions

Diameter: 45 mm

Height: 7 mm

Form factor: similar in size to a 1 oz silver capsule

Model origin is centered, making rotation in the slicer simple and precise

🖨 Recommended print settings

Layer height: 0.2 mm

No supports required

Prints flat on the build plate

Standard perimeters and infill work well

ℹ️ Notes

Multi-color filament behavior can vary depending on printer, nozzle, and filament brand. For best results, print this disk before visually important projects where color alignment matters.

Assembly Instructions

No assembly required. Once printed, the disk is ready to use for measuring angles immediately.

dual & tri multicolor filament angle finder disk sample

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 15% infill