Model Description

This is version 2 of the model that I designed at the beginning of the year, Version 1.

I have made the arm thicker as v1 has over the year begun to bow down slightly, probably from latent heat from the print bed below. So hopefully this will alleviate the issue. I have also filleted the edges to lessen the effect of elephant’s foot when printing.

I would like to take credit for this design but for the life of me I can't find the original owner. If it was you or you know who it is please message me and I will update the file. All I recall is that it was an STL file that needed to be converted to Fusion 360.

It is designed for a very lightweight LED strip of just a few grams and simply clips over the top 2020 extrusion

There is a recess in the frame for a type of Command Velcro Mount ( https://amzn.eu/d/gVV1Y1o ), I have the hooks on the mount and the fabric section on the light, but you may have your ideas.

I have posted the Fusion 360 files in case anyone wishes to amend the file for their light.

I printed it with Eryone Matt Black PLA Filament with these settings:

The model needs to be rotated 90 degrees onto its side for the best print.

Available Files

To cater to various needs and preferences, I have provided the following file types:

•

Fusion 360 files available here as Crealty doesn't support this type of file here

• 3MF

• STEP

• .STL

Feel free to customise and modify the design to suit your specific requirements.

Community Collaboration

I encourage you to share your customised versions on the community sharing page. By collaborating, we can learn from each other and enhance the design further. If you encounter any issues or if the design does not meet your expectations, please let me know on the sharing page. I will do my best to address any concerns.

Please like, save, and share the design if you find it useful. Your feedback, both positive and constructive, is invaluable in helping me improve these creations. I’d also love to see photos of your prints! I’m curious to see how they turn out for you.

Print Settings:

For two brackets, I used the following

• Normal Quality

• Nozzle: 0.2mm

• Walls: 3

• Top/Bottom Layers: 4

• Infill: 15% Cubic

• Supports: No

• Material: Eryone PLA

• Colour: Matte Black

• Weight: 31.63g

• Print Time: 4 hours 1 minute.7

Thank you for your interest and feedback! By sharing your experiences and improvements,

Ender 3 S1 LED Light Bar Brackets v2

0.2mm layer, 2 walls, 15% infill