Are you a top mount spool user? Considering using a top mount system for filament?

Design Concept

This is a 3D printed camera mount designed to securely attach a camera to the original side attachment for the spool. Enhances recording angles during work or creative projects.

Use

The mount is tailored for users who have removed the side spool attachment and want to reutilize that area for a camera mount.

Printing Tips

Recommended material: PLA or PETG for durability.
Use a layer height of 0.2mm or less for better detailing and strength.
Infill should be at least 15% to ensure stability.

Parts Needed

4 - Machine Screws: 3mm diameter x 15mm long

4 - Nuts: 3mm

Assembly Instructions

The product comes as a two-piece print to connect the mounting pieces together. Glue or screws with nuts can be used to connect the two pieces together. Align the four prefabricated holes and insert 4 each machine screws and nuts. Holes my need a 3.5 mm drill bit run through to clean it up and make some room for the screw to go through. Next, loosen the spool attachment hardware to allow enough room for the mounting piece to be mounted to the hardware and slid down to engage. Tighten the spool attachment hardware to be snug plus maybe half turn to secure.

Ender 3 V3 Plus Camera Mount (Side Spool Mount)

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill