Screen holder for the Nebula pad of the Ender 3 V3 KE in a horizontal/landscape position. I have made this model after using my first mount (http://www.crealitycloud.com/model-detail/6811fc09bf737a7e52b76d46) for some time. However I wanted to decrease the horizontal footprint of my Ender as much as possible to fit another printer next to it. So I made this mount instead.

Advantages are

- Smaller horizontal footprint of the printer

- Easy access to screws for mounting

- Easy access to usb-c port on the back

- Low enough not to be in the way of a camera arm mounted on the z-axis

- Screen can be easily removed from the mount

Print instructions

Use (tree) support for the pins on the display mount. Use 3 or 4 walls for extra strength.

Assembly

Use the original mounting screws to attach the mount to the printer

You can use the Helper script from Guilouz (https://guilouz.github.io/Creality-Helper-Script-Wiki/) to setup Guppy screen and other useful features on your Ender 3 V3 KE.

For the Guppy screen configuration you need to set display rotation to "2" (180 degrees), see https://ballaswag.github.io/docs/guppyscreen/configuration/#display_rotate

If you already have calibrated you need to re-calibrate by removing touch_calibration_coeff from the config file (https://ballaswag.github.io/docs/guppyscreen/configuration/#touch_calibration_coeff)

Ender3V3KE Horizontal Screen Holder (Guppy screen)

0.2mm layer, 4 walls, 15% infill

0.2mm layer, 2 walls, 15% infill