FOR MORE CREALITY UPDATES, PLEASE CHECK OUT MY MODEL LIBRARY. STAY TUNED.

It is designed so that the spool rotates without wobbling as the filament on the spool decreases. Apart from this, there is a risk of the spool falling because the edge height of the unrevised spool holder is not sufficient. This improvement eliminates this risk. Make sure that the balance lock is installed in the direction of rotation of the spool. It consists of two parts, fix the part with the keyhole from the front hole of the spool holder. (Install it by pressing it hard with your palm a few times on a surface like carpet without using a hammer. This part should be completely inserted into the hole.) Insert the upper part from the keyhole and turn it clockwise. If you want this part to be fixed by turning it in the other direction, print the reverse of the part inserted into the filament holder from the printer.

Creality Cloud - Filament wall fixing device İtibaren TridiStudium https://m.crealitycloud.com/en/model-details/68403cfe3c2412793a5c5130

Creality Cloud - Creality leg fixing İtibaren TridiStudium https://m.crealitycloud.com/en/model-details/6840370ad9bc4f366d467e6b

Imagining an original design and turning it into a solid model using the drawing method is a more arduous process than expected. If this design is a functional object, technical details and constructions also need to be solved. Therefore, it can sometimes take hours or even days to implement an idea. Small appreciations to the designer are enough to keep the motivation going.

The designer always reserves the right to change prices and the product offered.

Please don't forget to like for new designs.

filament spool unbalancer

0.2mm layer, 2 walls, 15% infill