"Flexi Crystal Dragon" by "Castro 3D"

Slicer : Creality Print v5.1.6.10470 (Win)

Printer : Ender-3 V3 (0.4 mm nozzle) (Firmware v1.2.3.21)

Filament(s) :

1 : Gold, Hyper PLA

Process | Global (Advanced Parameters)

0.20mm Standard @Ender-3 V3

- Quality

- Layer height : 0.20 mm

- First layer height : 0.20 mm

- Seam, Seam position : Aligned

- Strength

- Wall, Wall loops : 2

- Infill, Sparse infill density : 10%

- Support : No.

- Other

- Bed adhesion, Brim type : Auto

This print requires having a perfectly cleaned and degreased print bed (I use 99.9% IPA) and having previously done and checked an auto-leveling, as well as having a perfectly adjusted "Z-Offset"/"Z-axis compensation", to have a quality initial layer (sufficiently crushed on the bed) and which adheres correctly to the bed.

Otherwise, change the slicing settings to enforce a full brim

(

- Other

- Brim type : Outer and Inner Brim

- Brim width : 3 mm

)

All file(s) at 100% scale.

Plate 1

File(s)/Mesh(s) : (Mesh imported from FlexiCrystalDragon.3mf)

Filament used : Hyper PLA Gold Creality

Happy printing.

Flexi Crystal Dragon

0.2mm layer, 2 walls, 15% infill

0.12mm layer, 2 walls, 15% infill

0.16mm layer, 2 walls, 15% infill