Galaxy Watch Stand

A newly created Galaxy watch charging stand, created in the style of the remixed Laptop Stand model (Argoroots original) I previously uploaded. Aiming for both models to be stylish, complimentary and practical.

Assembly

Remove magnetic watch charge cable from the plug, pass the USB-C end through the hole in the model starting from the top. Pull all the cable through up to the magnetic watch charge point. Push the magnetic charge point and cable housing into the recess in the top of the watch stand until flush. Pull any remaining excess cable through from the underside of the model and push the cable into the slot in the base until it is flush, hidden, and has no unbalancing impact once the model is free standing. Re-insert the charge cable into the plug.

Following slice changes made:

Top / Bottom Shells

Top Shell Layers = 0

Bottom Shell Layers = 0

Infill

Sparce Infill Density = 10%

Sparce Infill Pattern = Honey Comb

Support

Enable Support = Enabled

Type = Tree (Auto). Other types left marks in the top face of the stand.

Samsung Galaxy Watch Charging Stand

0.2mm layer, 2 walls, 10% infill, Tree Supports (Auto)