玻璃刮水板 | Glass Squeegee

>> 模型介绍 | Model Introduction >>>>>>>>

回南天，玻璃上都是水雾，为了方便清除，所以弄了这个小工具。当然，也是为了方便在汽车玻璃上使用。由于平台板太小，做不了一体打印件，只能拆分了。对了，清理玻璃的时候记得用布把面板包上哈。🤣

During the humid season, glass surfaces tend to fog up with moisture. To make cleaning easier, this small tool was created. It’s also convenient for use on car windows. Because the print bed is too small to print the entire piece as one unit, it had to be split into multiple parts. By the way, remember to wrap the panel with a cloth when cleaning the glass.

>> 打印配置 | Print Settings >>>>>>>>

（仅参考，可自定义）

(Referential, Customizable as Needed)

耗材 Filament：PETG

填充 Infill：15%

填充图案 Infill Pattern：网格 Grid

支撑 Support：不需要 Not Required

Brim/Raft: 仅外侧 Outer side only

>> 组装说明 | Assembly Instructions >>>>>>>>

即打即用，简单组装；

Ready to use upon installation; simple assembly required.

>> 其他说明 | Additional Notes >>>>>>>>

模型使用 Blender 4.2.5LTS制作。

已生成并上传STL，可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。

The model was created using Blender 4.2.5 LTS

The STL file has been generated and uploaded. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.

>> 其他说明 | Additional Notes >>>>>>>>

1. 模型使用 Blender 4.2.5LTS制作。

2. 可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。

3. 无论如何，遇见是缘分，能用是巧合，留个言点个赞，关注收藏一起浪。

1. The model was created using Blender 4.2.5 LTS.

2. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.

3. Anyway, meeting is fate, being able to use it is coincidence. Leave a comment, give a like, follow and save, and let's ride this wave together.

>> 声明 | Statement >>>>>>>>

由于个人时间和精力有限，本人仅通过个人注册的平台和账号以及个人拥有的域名（PoweredBy.CN）发布模型相关信息。其他非个人注册、授权的平台和账号发布涉及到本人制作的模型图纸均与本人无关且涉嫌非法获利，本人保留追偿权利。本人在互联网上一直秉承着“自由分享，免费共享”的理念，对已公开发布的模型图纸不会以任何理由限制下载（包含但不限于收费制、会员制、积分制等限制），请注意甄别！

所有自造物件使用的知识共享许可协议：CC BY-NC-SA 4.0

Due to limited personal time and energy, I only release model-related information through platforms and accounts registered under my personal name, as well as the domain name owned by me (PoweredBy.CN). Any distribution of model drawings related to my work on platforms or accounts that are not personally registered or authorized is unrelated to me and may involve illegal profit-making. I reserve the right to seek compensation for damages. I have always adhered to the principle of "free sharing and open access" on the internet, and I will not impose any restrictions (including but not limited to paywalls, membership requirements, or point systems) on downloading publicly released model drawings. Please verify the authenticity of the source!

All self-made objects are licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).

玻璃刮水板 | Glass Squeegee

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill