This is not my original design. This design was done by Christopher JH. All credit to him and this awesome model.

Here's the link to his profile. https://**********.com/en/@christofer.jh

https://**********.com/en/@christofer.jh

This golf ball dispenser works great, and I wanted to make sure others can find it on the Creality Cloud.

I have adapted it for printing on the Creality K2 Plus.

This is the entire model that comes with the additional hopper on top of the ball garage and a pedal spring that I designed.

The only thing I can take credit for is the design of the pedal spring. I had struggled to find something that would work to return the pedal to the bottom, so I designed a pedal spring.

Tower, ball garage, and hopper: i would recommend PETG or ABS at 25% infill

Feet and other parts: PLA at 25% infill

Ramp: PLA or ABS at 25% - 30% infill

Zero Extra Hardware: 100% 3D printed. No glue, rubber bands, screws, or bolts required. Simply add golf balls!

Ball Garage: Holds up to 25 golf balls, so you can spend more time practicing and less time refilling.

Smooth Feeding Mechanism: Reliably places a ball on your tee with a simple on/off pedal, removing any guesswork or jammed balls. It dispenses exactly one ball for each press.

Easy Assembly: Roughly 8 parts slot together seamlessly; it’s sturdy yet hassle-free to build.

Adjustable legs: Print the optional adjustable legs to lift 3cm or just to handle an uneven floor.

Filament Usage: Requires about 3/4 roll of filament. It’s a worthy trade-off for a truly reliable ball dispenser. You asked for this!

Golf Ball Dispenser Pro + Hopper & Spring

0.2mm layer, 2 walls, 20% infill

0.2mm layer, 2 walls, 20% infill