--First, Plan your layout-- Bins are available in Small (2x5 grid units) and Gallon (either a 2x7 or 2x8). Small bins fit quart size and smaller bags.

--Then, pick your lids-- The smalls all use the same bin/lid geometry, just pick the labels (or go with the blank lid). The Gallon lids are simply marked "Gallon"

--Either use the either of the Gridfinity Baseplates posted here (see the photos for examples of configurations), or go to https://gridfinitygenerator.com/en to create your own Baseplate to fit your configuration.

Notes:

Bins are designed to fit standard 42mm Gridfinity Baseplate layouts.

Everything is printable without supports. Print the lids upside down.

Twelve 6x2mm magnets are needed for each of bin+lid pair. You may also choose to fit the Gridfinity bases with magnets to secure them to the base, though I find it unnecessary. Make sure you install them with opposite polarities, of course.

I created two versions of the Gallon storage. One to fit a 2x8 grid, and a shorter one to fit a 2x7 grid. The 2x8 version stacks well across four of the smaller bins. But if you’re using fewer than four small bins, the 2x7 gallon might fit your space more appropriately.

Two Gridfinity Baseplates are included here as an example. The 7x8 Gridfinity Baseplate (which will fit four of the small bag bins and one gallon bag bin) requires a 350x350mm print surface. If you’d like a smaller layout, using fewer bins, check out the Gridfinity Generator at https://gridfinitygenerator.com/en to create a baseplate to fit your needs.

The lids are available with various labels (Gallon, Freezer, Storage, Sandwich, & Snack), as well as a blank lid for the smaller binsUpdate: Added a 2x4 grid open top bin, to fill a a space in the baseplate when using two small5x2’s and one gallon2x7

Gridfinity compatible Ziploc Storage

0.2mm layer, 2 walls, 15% infill