Magical bundle of 3D printable and fully customizable Hogwarts Legacy Wands. This digital model is a fan-made replica of wands from the Harry Potter: Hogwarts Legacy game.

Files contain:

- 8 base wands (whole, halves), connecting screws

- 20 additional grips (handles)

Wands: Classic, Crooked, Natural, Notched, Ringed, Soft Spiral, Spiral, Stalk.

Grips: Avian, Arrow, Basketweave, Botanical, Celestial, Checkerboard, Column (3x), Corkscrew, Imperial, Orbicular Regal, Sabre (3x), Shell (3x), Swirl

Although a single print is typically enough, you might want to consider printing the screw in multiple copies and choose the one that prints the best for a good fit between the two wand halves.

SCALE

At 100% scale, assembled wands are approx. 305 mm / 12 inches long

But you can scale the model according to your needs.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.

You can join our community or just look at more of our creations here:

https://3d-mon.com/3d-model/type/accessories3dprintmodel/hogwarts-legacy-collection

3D PRINTING SETTINGS

We recommend a layer height of 0.05 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. Printing settings will vary greatly depending on your specific printer.

Hogwarts Legacy Collection - Wands and Customizable Handles

0.2mm layer, 2 walls, 15% infill