Layer Height: 0.20mm
    Initial Layer Height: 0.20mm

Arc Configure Enable: no
Small Feature Max Length: 6.00mm
Small feature speed: 100.00%
Enable Bridge Settings: yes
Bridge Has Multiple Layers: no

SHELL
Wall line Count: 2
Only One Wall for Roofing: no
Top Layers: 4
Bottom Layers: 4
Top Surface Skin Layers: 1
Fill Gaps Between Walls: everywhere
Vertical Expansion: 0.00mm
Horizontal Expansion: 0.00mm
Z seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Enable Ironing: no

INFILL
Infill Density: 15.00%
Infill Line Distance: 2.67
Infill Pattern: Zig Zag
Infill Overlap Percentage: 30.00%
Infill Overlap: 0.12mm
Infill Layers Combination: NO
Gradual Infill Steps: 0
Narrow Area Concentric Infill: NO

SPEED
Print Speed 300.00mm\s
    Infill Speed: 300.00mm\s
    Outer Wall Speed: 200.00mm\s
    Inner Wall Speed: 300.00mm\s
    Top Surface Skin Speed: 200.00mm\s
    Top/Bottom Speed: 200.00mm\s
    Support Speed: 300.00mm\s
Travel Speed: 300mm\s
    Initial Layer Print Speed: 100.00mm\s
    Initial Layer Travel Speed: 150.00mm\s
Set Overhanging Wall Speed Grading: YES
Enable Acceleration Control: YES
Enable Jerk Control: NO

SUPPORT
Generate Support: YES
Support Structure: Normal
Support Placement: Touching Build Plate
Support Overhang Angle: 60.00*
Support Pattern: Concentric
Support Density: 10.00%
Support Z Distance:
    Support Horizontal Expansion: 0.00mm
    Support Layer Thickness: 0.15mm
    Gradual Support Infill Steps: 0
    Enable Support Interface: YES
    Enable Support Roof: YES
    Enable Support Floor: YES
Support Interface Thickness:

Material Will Vary

COOLING
Enable Print Cooling: YES
Regular Fan Speed: 100.00%
Maximum Fan Speed: 100.00%
Regular/Maximum Fan Speed Threshhold: 10.00s
Force Cooling For Overhangs and Bridges: YES
    Force Cooling Overhang Threshold: 50.00%
    Fan Speed for Overhangs/Bridges: 100.00%
Small Feature Fan Speed: 100.00%
Bridge Fan Speed: 20.00%
Supported Skin Fan Speed: 100.00%
Initial Fan Speed: 0.00%
Regular Fan Speed at Layer: 2
Minnimum Layer Time: 5.00s
Minimum Speed: 10.00mm\s

nice and easy, should be print in place, should be enjoying it

home made plumpkin

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill