Design Concept

The Inductive Angel Tea Light is beautifully crafted to bring a sense of peace and tranquility. Its angelic design is elegant and captivating while the warm LED light symbolizes hope and warmth.

Purpose

This model serves as a decorative piece perfect for enhancing the ambience of a room. The gentle glow emitted makes it ideal for intimate settings, or as a comforting night light.

Printing Suggestions

To achieve the best quality, use transparent or semi-transparent filament to allow the LED to diffuse beautifully through the angel. Ensure high resolution to capture fine details.

Supplies

Soldering iron and solder.
Ohmmeter.
Thick double sided tape.
Thick cyanoacrylate glue.
Red and black AWG 22 wire.
Heat shrink tubing.

Step 1: Parts.

I acquired the following parts:

One Adafruit inductive charging set (Adafruit part number 1407).
One mini lithium battery charger (https://www.amazon.com/gp/aw/d/B0BRXYZTWN?ref=ppx_pop_mob_b_asin_title&th=1)
One 3.7 volt 200ma lithium battery (https://www.amazon.com/gp/aw/d/B09WN9W5YV?psc=1&ref=ppx_pop_mob_b_asin_title).
One plastic normally closed reed switch with magnets (https://www.amazon.com/gp/aw/d/B088CQL44X?psc=1&ref=ppx_pop_mob_b_asin_title).
One 9VDC 400ma power supply.
One angel tea lamp LED (3VDC).

I 3D printed the following parts at .15mm layer height, 20% infill with no supports:

One "Angel Base Cover.stl".
One "Angel Base.stl".
One "Angel_Tea_Light_Small.stl".
One "Charger Base Cover.stl".
One "Charger Base.stl".

Prior to assembly, test fit and trim, file, sand, etc. all parts as necessary for tight fit . Depending on the colors you chose and your printer settings, more or less trimming, filing and/or sanding may be required.

Assembly Instructions

Simply place the angel model on top of the LED tea light base. Ensure the lighting mechanism is properly aligned to illuminate the angel figure effectively.

Inductive Angel Tea Light-Angel Light,Warm LED