This kit was originally created by Crashworks3D and was ported over to the Creality Cloud by me.

This is a complete motorization kit for the Mk85 helmets, and should work with most of the current MK85 designs.

Use this link to download the required Arduino code for this project: https://github.com/crashworks3d/Iron_Man_Servo

As the Arduino code is constantly evolving, if your code exhibits any unusual behavior please check the GitHub link to ensure you have the most current version of the Iron_Man_Servo Code

Please read attached MK85 Helmet Tutorial, it lists all the steps necessary for this project

You will need metric size screws for this project, the most common sizes are M3 & M4. As an example they are normally labeled as follow M3-0.5 which means M3 (Diameter / Size) -0.5(Thread Pitch), or M4-0.7 which means M4 (Diameter / Size) -0.7(Thread Pitch).

Included are all of the files needed to fit and align servos into your helmet. Servo mounts for both the Tower pro MG90s and clone Tower pro MG90s servos are included.

Included files:

Tower Pro servo mount

Clone Tower Pro servo mount

Servo horn arm geared (60mm)

Servo horn arm

Servo horn arm (cap)

Faceplate bracket square edge

Faceplate bracket round edge

Helper arm

Helper arm mount for M3 (screw)

Helper arm mount for M4 (screw)

Servo alignment tool

Helper arm alignment tool A

Helper arm alignment tool B

Servo mount wire cover

Do not scale any of the files, as they are all size specific

Print the following files:

1x Tower Pro servo mount -OR- 1x Clone Tower Pro servo mount

2x Servo horn arm -OR- 2x Servo horn arm geared (60mm) NEW

2x Servo horn arm (cap) - OPTIONAL

1x Faceplate bracket square edge - OR- 1x Faceplate bracket round edge

2x Helper arm

4x Helper arm mount for M3 (screw) - OR- 4x Helper arm mount for M4 (screw)

1x Servo alignment tool

1x Helper arm alignment tool A

1x Helper arm alignment tool B

1x Servo mount wire cover - OPTIONAL

Print Settings

Printer brand:

Creality

Printer:

Ender 3

Rafts:

Supports:

Resolution:

.16

Infill:

35% ~ 50%

Filament brand:

Generic

Filament color:

N/A

Filament material:

PLA

Notes:

Recommended infill type is Gyroid, and recommended print speed is 35 ~ 50 mm/s.

Iron Man MK85 Helmet Motorization Kit

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill