Requested by @PrintArsenal, Now Here For All!

I Have Added 6 new files, 3 .stl and 3 .3mf

The .STL's

JackHead2Colors - Works for Non CFS/AMS but You will have to manually find which layer you want to pause if you resize, Otherwise I suggest Starting with Black, and inserting a pause/filament change @Layer8 then switch to White.

JackHead2Colors - Split+Assemble before print : I am still pretty unfamiliar with the CFS/AMS systems, On my machine I find that performing a (Split to Objects) Followed by (Assemble) works without any "Collision" errors ect... If anyone wants to share a better way I Thank You. This file will result in a typical Black/White face as viewed from either side (Front or Back), but is Heavy on the waste with 5 Color changes @1mm & .20 LayerHeight

JackHead2ColorsV2 - Same as (JackHead2Colors) With the Difference being the first is Debossed(Recessed Design White on Black) and I decided I wanted both so V2 is Embossed(Raised Design Black on White)

The .3MF's

Hopefully the titles take the place of any explanation, Files should be ready to print, CFS/AMS only will not work on a machine without, while "No CFS/AMS Required" is for all others.

If anyone has any questions, concerns, feedback ect feel free to drop comment below, Until then I hope you all enjoy these files since I'm going to keep bringing them, Because Sharing is Caring!

When Remixing a K3 cover for my Wife I struggled to find a simple design of Jack Skellington's face that could be used. Regrettably every model I found had a "Problem"... Anything from the model just not being clean enough, to the creator charging for it. (Nothing against those selling Models but I will never charge for something that includes Intellectual Property that is not my own.)

So now I have returned to upload, because I already turned it into a model, and Sharing is Caring! I hope this model finds you well, and helps others to more easily Remix.

Remix Culture FTW!

On my Ender 3 V3 KE it took

~45 Min

~16 Grams

100% Infill

@0.2 layer height

Sunlu White PETG

I did include .3mf for easy printing, but the .stl lets you resize and it does scale well.

@100% size it comes out thin but prints fast (3 min on Ender3 KE and 8min on AC Kobra3)

The one shown in my pictures is printed @331% scale, meaning the .3mf will produce a print ~115x107x2 mm

Jack Skellington Set

0.2mm layer, 2 walls, 9% infill

0.2mm layer, 2 walls, 15% infill