K-fee Wave – Cup Riser / Height Adapter for Capsule Coffee Machine

I designed this cup riser / height adapter for my K-fee capsule coffee machine (Wave model) to reduce the distance between the brew outlet and the cup.

Without it, coffee tends to splash a lot, especially when using smaller cups.

The model is designed as a cup-shaped stand placed directly under the mug.
A small drainage hole in the bottom allows rinse or drip water to flow back into the water tank instead of collecting underneath.

The adapter is printed in PETG, making it water-resistant and suitable for daily use on a coffee machine.

While designed specifically for the K-fee Wave, it may also work with other capsule or coffee machines, depending on their geometry.
Please check the dimensions below to ensure compatibility.

Dimensions

Bottom contact diameter: 82 mm

Outer diameter: 86 mm

Total height: 36 mm

Print Settings (Creality K2 Plus)

Material: PETG

Nozzle: 0.4 mm

Layer height: 0.20 mm (High Quality)

First layer height: 0.24 mm

Seam position: Back

Zig-zag seam: Better (Contour)

Wall order: Inner – Outer – Inner

Wall loops: 8

Top layers: 8

Bottom layers: 8

Infill: 15 %

Supports: Enabled

Type: Tree

Style: Organic

Placement: Build plate only

K-fee Wave Cup Riser /Height Adapter for Capsule Coffee Mach

0.2mm layer, 8 walls, 15% infill

0.2mm layer, 2 walls, 15% infill