Design Concept

The base pan tray is designed to provide a sturdy and stable surface for a 3D printer or other machinery, ensuring that debris generated from the CFS filament poop process is neatly contained and easily removable. This is my first model created from Fusion 360 and my first Creality Cloud upload.

Original model is 10mm tall - there is zero interference with the plate even when fully lowered

04/11/2025 Created a V2 version that is 20mm tall - this one will interfere with the plate in the very lowest position. This is the white/red tray with the textured top surface. To get the textured top surface, choose Advanced settings:

Quality - Wall and Surfaces - Top Surface Flow Rate = 1.7

Strength - Walls -Top/Bottom Shells - Top Surface Pattern = Hilbert Curve

04/12/2025 Created a V3 version that is 15mm tall - should not interfere with the plate in the lowest position. Also made walls and base 2mm instead of 2.5mm so this one uses less material to print.

Use

This tray is ideal for use in the Creality K1, K1C and K1SE printers with the CFS upgrade installed.

Printing Suggestions

Print with a material of interest such as PLA, ABS or PETG. Ensure the first layer adhesion is good to prevent warping during the printing process. Printed with PLA, 0.4mm nozzle, 0.2mm layer height, 2 walls, 15% infill of choice. Position model with flat bottom on build plate - for some reason the model shows it 90 degrees rotated up. Auto-orient in Creality Print will correct this.

Assembly Instructions

The tray requires no additional assembly; simply place it in the required location for immediate use.

K1-K1C-CFS Base Pan Tray

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill