Source models

This is a remix of the following models:

K2 Plus drawer Remix with printable rail by Jems

K2 Plus drawer with build plates stand by d_v_ermakov 

Updates

*** 04.04.2026 - Wrong dimensions for melt-in thread inserts in instructions corrected.

*** (thanks to CMeister for pointing this out).

******************************************************************************************

*** 01.03.2026 - Erroneous part ‘Frame RB.stl’ replaced.

*** Please download print settings and/or stl again.

******************************************************************************************

*** 14.02.2026 - Smaller version with just 1 drawer added.

*** Please use frame parts and rear panel with "_S" in file name for smaller version.

******************************************************************************************

*** 20.02.2026 - New front panel version for smaller drawer base

*** Please use front panel parts "c"

******************************************************************************************

Drawer base for Creality K2

To offer similar space to the drawer base for the larger K2 plus, this printer base has two drawers, one above the other, each with two 6x4 Gridfinity grids. Underneath the lower drawer is a shelf for a building plate. In addition, there are holders on the left-hand side for up to three additional building plates. If these are not needed, two additional components without these holders are available in the settings (plate 13).

Additional parts

The following additional parts are required for assembly. Number of parts for the base with two drawers. Number in brackets for the smaller base with only one drawer.

Connect the trays (with the countersunk screw holes facing forwards on each tray)

- 8 (4) pcs M2 6 mm screws

- 8 (4) pcs M2x4x3.5 mm melt-in thread inserts

Attaching the rails (the longer ones at the front, the shorter ones at the rear)

- 40 (20) pcs M2 4 mm screws

- 40 (20) pcs M2x4x3.5 mm melt-in thread inserts

Attaching the front panels and handles

- 4 (2) pcs M3 4 mm screws

- 4 (2) pcs M3 8 mm screws

Connection of the frame and the rear panel

- 8 (4) pcs M4 8 mm screws

- 8 (4) pcs M4x4x6 mm melt-in thread inserts

- 2 (2) pcs M4 12 mm screws (rear panel)

- 2 (2) pcs M4x4x6 mm melt-in thread inserts (rear panel)

Parts list (2-drawer base)

- Connector - Frame connectors (4 pcs)

- Frame LB - Left rear frame, with building plate holder

- Frame LB (no plate) - Left rear frame, without building plate holder

- Frame LF - Left front frame, with building plate holder

- Frame LF (no plate) - Front left frame, without construction plate holde

- Frame RB - Rear right frame

- Frame RL - Front right frame

- Front 1 (complete) - Upper drawer panel, combined with logo in one file

- Front 1b - Upper drawer panel, without logo

- Front 1b C-Logo - Logo for upper drawer panel

- Front 2 (complete) - Lower drawer panel, combined with text in one file

- Front 2b - Lower drawer panel, without text

- Front 2b Text - Text for lower drawer panel

- Handle - Handle for drawers (2 pcs)

- Rail B - Rear rail (shorter rail, 4 pcs)

- Rail F - Front rail (longer rail, 4 pcs)

- Real Panel - Rear panel

- Tray - Drawer compartment (4 pcs)

To print the drawer base with the side building plate holders, please use building plates 1-8. If you prefer not to use the side holders, use the parts from plate 13 instead of the frame parts on plate 1.

Plate 4 contains the front panels with text and logo in multicolour. If you would like front panels without text/logo, you can remove them. Plate 14 contains front panels with text/logo for single-colour printing.

On plates 9-12, you will find 12 different Gridfinity boxes that can be inserted into the drawers in any combination. If you require other sizes or designs, you can create them yourself free of charge using the Gridfinity generator: https://gridfinitygenerator.com/

Parts list (1-drawer base)

- Connector - Frame connectors (2 pcs)

- Frame LB_S - Left rear frame, with building plate holder

- Frame LB_S (no plate) - Left rear frame, without building plate holder

- Frame LF_S - Left front frame, with building plate holder

- Frame LF_S (no plate) - Front left frame, without construction plate holde

- Frame RB_S - Rear right frame

- Frame RL_S - Front right frame

- Front 1c (complete) - Drawer panel, combined with text and logo in one file

- Front 1c - Drawer panel, without logo

- Front 1c C-Logo - Logo for drawer panel

- Front 1c Text - Text for drawer panel

- Handle - Handle for drawers (1 pcs)

- Rail B - Rear rail (shorter rail, 2 pcs)

- Rail F - Front rail (longer rail, 2 pcs)

- Real Panel_S - Rear panel

- Tray - Drawer compartment (2 pcs)

K2 (not pro/plus) drawer base

Smaller base with 1 drawer. 0.2mm layer, 3 walls, 15% infill

Base with 2 drawers. 0.2mm layer, 3 walls, 15% infill

Original