Creality K2 Plus Top Mounted Auto Rewind Spool Holder Remix Add-on for TPU

This remixed add-on should be used with the following Top Mount here:

https://www.crealitycloud.com/model-detail/creality-k2-plus-top-mounted-spool-holder-tpu

Features:
This allows to use the Auto Spool Rewind model. This only includes the remix holder for the above mentioned spool holder. You will still need to download and print out the parts for the Auto Rewind holder. You can review the assembly and demonstration of how it works here:

Due to the position of this holder being placed on the front end of the machine. When the printer moves to the back it unravels the filament from the spool. The auto rewind spool holder attempts to remedy this issue to not let the the filament droop down into the build area and/or get tangled around the print head. The tension is adjustable as can be seen in the video and can be change to your liking. This also has a slipping clutch system so if the tension is constant as the filament is being fed the clutch will slip to reduce the tension on the spool.

Assembly:

The provided GIF's in the gallery should clearly show how to assembly and use it. The axle screw on holder will go on the holder and screw on at an angle that matches when mounted on the printer. The additional holder on the opposite side is to hold the whole assembly securely in place for printing.
For assembly of the auto rewind spool holder please review the original authors documentation and video in the provided links. In my case I printed the following files:

SpringFlat_Soft_v3.3.STL

Clutch_v3.3.STL

Dial_v3.3.STL

Axle_v3.3.STL

Clip_v3.3.STL

Hub_v3.3.STL

NutCurved_v3.3.STL - 2x

All Credits go to the original author VincentGroenhuis linked for the design.

https://www.***********.com/thing:3338467

https://www.crealitycloud.com/model-detail/creality-k2-plus-top-mounted-spool-holder-tpu

K2 Plus Top Mounted Spool Holder Addon Remix #1 for TPU

0.2mm layer, 2 walls, 15% infill

Original