This Krilin Scanned with Creality Ferret Pro model is made by Sdsyc

It is well detailed model. I have printed it this stl file model on scale 70%. The Model doesn't required any support. I have Activated the "Make overhangs printable option" for minor overhang supporting. Model will perfectly comes Out at any size.

I have used the PLA Material.

Material Used: PLA+ White

Print Parameters:

1) Slicer Software : Creality Print 6.0

2) Printer: Ender3 KE.

3) Profile mode: Normal Quality (0.2mm) (seam position-Back) (Scarf joint-Counter) for smoother.

4) Infill: 15% (Rectilinear Pattern)

4) Scale: 70%

5) Retraction: 2mm minimum.

6) Print Speed: 300mm/s.

7) Printing Temp: 220 0 c.

8) Bed Adhesion: Raft.(2 Layers)

9) Support: No.( Activate "Make overhangs printable option")

Note: Before printing Make sure Bed is well adhered with glued for perfect first layer.

I didn't find any issue with print. Go ahead with KE.

Hope You like it..!! Thanks for Watching..!! Happy Printing.

Krilin Scanned with Creality Ferret Pro

0.08mm layer, 2 walls, 15% infill

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 15% infill