Printing Instructions for the Wall-Mounted Glass Holder

Printer Model: Creality K1 Max

Material: PLA

Extruder: 0.4 mm nozzle (Hyper PLA-1.75)

Bed Type: High Temp Plate

Printer Settings:

Layer Height: 0.08 mm (minimum) to 0.3 mm (maximum)

First Layer Height: Use a thicker first layer for better adhesion (e.g., 0.2 mm)

Extruder Temperature: 210°C (Initial layer), 220°C (Standard layer)

Bed Temperature: 60°C

Print Speed:

Max speed (X/Y): 800 mm/s

Max speed (Z): 30 mm/s

Max speed (Extruder): 100 mm/s

Acceleration:

X/Y: 20,000 mm/s²

Z: 500 mm/s²

Extruding: 20,000 mm/s²

Retracting: 5,000 mm/s²

Travel: 20,000 mm/s²

Retraction Settings:

Retraction Length: 0.6 mm

Retraction Speed: 40 mm/s

Z-Hop: 0.4 mm

Retract Before Wipe: 70%

Retraction Restart Extra: 0 mm

Minimum Retraction Travel: 1 mm

Cooling:

Fan Speed: Increase for overhangs

Fan Kickstart: 0

Nozzle Type: Brass

Support: Enable air filtration if necessary for cleaner prints

Print Orientation: Preferred orientation is set to 0, maximizing stability and ease of print.

Labor-mount-NS14-NS24-NS29.2-NS45