🌹 Large Decorative Rose Lamp – Three-Part Design with Service Cover
This is a larger version of my decorative rose lamp.

The lamp has an overall height of approximately 200 mm and a diameter of around 190 mm. Due to its size and the thin vase-style structure, it creates a soft and evenly distributed lighting effect.

The model consists of three parts:

the upper rose
the base
and a removable bottom cover

The rose is printed in vase mode and glued to the base afterward.
The base includes a removable bottom cover, allowing easy access to the internal LED lighting for maintenance or replacement.

The bottom cover is secured with:

2x M3 countersunk screws

Recommended screw length:

maximum 10 mm

Thanks to the removable cover, the installed LED can easily be replaced or upgraded. Both white LEDs and RGB lighting systems can be used.

All parts were printed in white PETG.

⚙ Print Settings
🌹 Rose (Vase Mode)
Printer: Creality K2 Plus
Material: White PETG

Layer height: 0.24 mm
Print mode: Vase / Spiral Vase

🧱 Base
Printer: Creality K2 Plus
Material: White PETG

Layer height: 0.24 mm
Wall loops: 3
Top layers: 5
Bottom layers: 4
Infill: 10%

🔩 Bottom Cover
Printer: Creality K2 Plus
Material: White PETG

Layer height: 0.2 mm
Wall loops: 4
Top layers: 5
Bottom layers: 4
Infill: 15%

Large Rose Lamp – Three-Part Design with Service Cover

0.24mm layer, 2 walls, 15% infill