The Life SMP is a great series, and I wanted to show off my love for it on-the-go, so I made these tags for use on keys and bags!

I have made it so you can print each tag individually, or in the entire set of 5. There is also a “traffic light” heart tag too. that is slightly smaller to accompany the regular tags.

IMPORTANT: The ‘Wild Life’ tag has 5 colours. There are ways you can print this tag with 5 colours. By default, you want to keep the black, white, and red. It's the 4th colour you can get away with swapping.

If you want all 5 colours you will require 2 AMS.

You can assign the green or yellow to one of the other colours and then paint the yellow or green on by hand.

If you are quick, or know how to add pauses during a print, and know when the green or yellow is up next to print, you can swap the spool colour manually. (such as swapping the green for yellow, and then back to green again).

The 3MF was made in Bambu Studio and loses its paint data when loaded in other slicers. You will have to paint them in your slicer of choice if you use the RAW STL files or the 3MF outside Bambu Studio.

This file covers personal, non-commercial use; do not share or redistribute without attribution. Do not sell the files or prints of the files. Remixing is allowed but again providing attribution is required.

Please visit my Patreon to learn how to obtain a Commercial License: https://www.patreon.com/thomastedwards

Life SMP Series Charms

0.24mm layer, 2 walls, 15% infill

0.24mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill