>> 模型介绍 | Model Introduction >>>>>>>>

给3D打印机的丝杆和光轴做润滑保养的时候，便于均匀涂抹润滑脂。另外，工具尾部还做成小铲，用于对狭窄和细节处进行涂抹和平整。

Facilitates uniform grease application on 3D printer lead screws and smooth rods, with an integrated micro-spatula tip for precision coating and leveling in sub-millimeter cavities and micro-features.

模型详情请阅读打印配置描述。

For detailed model specifications, refer to the print configuration description.

>> 打印配置 | Print Settings >>>>>>>>

（仅参考，可自定义）

(Referential, Customizable as Needed)

耗材 Filament：PETG

填充 Infill：15%

填充图案 Infill Pattern：网格 Grid

支撑 Support：需要 Required

Brim/Raft: NONE

>> 组装说明 | Assembly Instructions >>>>>>>>

即打即用，无需组装。

Print and Use Immediately; No Assembly Required.

>> 其他说明 | Additional Notes >>>>>>>>

1. 模型使用 Blender 4.4.3制作。

The model was created using Blender 4.4.3.

2. 可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。

You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.

3. 无论如何，遇见是缘分，能用是巧合，欢迎点赞加收藏，感谢关注和助力！

Regardless of fate bringing us here, it's a happy accident that I could help—click like and save this post! Many thanks for your following and the boost!

4.本篇英文翻译出自于DeepSeek。

This English translation is powered by DeepSeek.

>> 声明 | Statement >>>>>>>>

由于个人时间和精力有限，本人仅通过个人注册的平台和账号以及个人拥有的域名（PoweredBy.CN）发布模型相关信息。其他非个人注册、授权的平台和账号发布涉及到本人制作的模型图纸均和本人无关且无任何利益关联。本人在互联网上一直秉承着“自由分享，免费共享”的理念，对已公开发布的模型图纸不会以任何理由限制下载（包含但不限于收费制、会员制、积分制等限制），请注意甄别！

欢迎您通过下载、点赞、关注、收藏、助力的方式表达您对模型的认可和喜爱，同时也非常感谢您对模型的点评。

您若同意并遵循知识共享许可协议“CC BY-NC-SA 4.0”，本人欢迎您对模型页面进行任何形式的站外分享，也非常赞同和认可您对模型进行升级改造后的再分享行为。

Due to limited personal time and energy, I only publish model-related information through personally registered platforms, accounts, and my owned domain (PoweredBy.CN). Any content involving model designs created by me that is posted on non-personal or unauthorized platforms/accounts is unrelated to me and involves no financial or beneficial association. I have always adhered to the principle of "free sharing and open access" online. For publicly released model designs, I will never impose restrictions on downloads (including but not limited to paid subscriptions, membership requirements, point systems, etc.). Please exercise caution and verify the sources.

You are welcome to express your appreciation for my models through actions such as downloading, liking, following, bookmarking, or boosting my work. I sincerely value your feedback and constructive critiques.

Provided that you agree to and comply with the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), I warmly welcome you to share the model pages externally in any form. Additionally, I fully support and endorse the act of sharing the models after they have been modified or enhanced.

轴杆润滑保养辅助小工具 | Linear Lubrication Aid

配置-2 | Configuration-2

配置-1 | Configuration-1

0.2mm layer, 2 walls, 15% infill