🔒 Protect Your Privacy: Logitech Webcam Privacy Shutter 🛡️
In the age of daily video calls, remote work, and online gaming, digital security is more important than ever. Don't rely on a sticky note or a piece of tape to cover your lens! Upgrade your setup with this precision-fit, sleek Flip-Up Privacy Shutter designed specifically for Logitech webcams.

This design clips firmly onto your camera housing and features a smooth hinge mechanism, allowing you to instantly block your camera when it's not in use and flip it up effortlessly when it's time for a meeting.

🔧 Print the two pieces and then use a raw 1.75mm filament piece cut to length for the hinge pin.

✨ Premium Features
🗲 Solid, Snug Fit: Engineered to clip securely onto the front of your camera. It fits tightly enough that you could shake the camera and it won't budge!
🔄 Smooth Flip Shutter: Quick, satisfying flip-action lid that stays put when opened or closed.
👁️ Zero Lens Obstruction: The base frame sits perfectly around the camera housing, ensuring your wide-angle view is never cropped or obscured when open.
🛠️ No Extra Hardware Needed: The entire assembly is 100% 3D printable, utilizing raw filament for a longlasting pin to join the hinge. No screws or springs required!
🎨 Fully Customizable: Print it in stealthy matte black to match the OEM casing, or use a vibrant neon filament to add a pop of color to your desk setup!

🔍 Compatibility & Sizing
📷 Fits Many Logitech Models: Designed for standard curved-rectangle Logitech webcam bodies. Look closely at the cover photos—if your camera has a similar profile, this should fit!
📏 Quick Measurement Check: To be absolutely certain, measure the front face of your webcam. If the width is close to 28.8mm, you are good to go!

⚙️ Print Settings & 3MF Optimization (READ FIRST) 🖨️
🚀 PRO TIP for the Easiest Print: I highly recommend downloading and using the provided .3mf file!

The .3mf print plate has been pre-configured with optimized per-item settings directly from the author. It applies supports exactly where they are needed and leaves them off where they aren't, guaranteeing the best possible mechanical fit right off the build plate.
If you prefer to slice the files manually using the individual .stl parts, here is the breakdown:

🔧 Print the two pieces and then use a raw 1.75mm raw filament piece cut to length for the hinge pin.

Boost Me

Like this model - Throw it a make, post, or boost to help it get higher listed. Thank you in advance.

Boost

Logitech Webcam Privacy Shutter

READY TO PRINT

0.16mm layer, 3 walls, 15% infill