🚀 Maximize Your K2 Plus Build Volume!

Ever needed a zip tie that standard sizes just can't handle? This model takes full advantage of the Creality K2 Plus build plate to produce a massive 475mm (18.7 inch) heavy-duty cable tie.

Perfect for organizing large cable bundles, securing heavy items, or industrial applications where standard ties fall short.

✨ KEY FEATURES: • Ultra-Long: 475mm usable length. • Print-in-Place: No assembly required. Just print and use. • Heavy Duty: Designed with extra wall loops for maximum strength.

⚠️ CRITICAL PRINT INSTRUCTIONS:

1. ORIENTATION: This model utilizes the full diagonal of the build plate. If you are not using the provided .3mf project file, you MUST rotate the model 45 degrees on the Z-axis to fit it.

2. ADHESION: Because this model is very long and thin, it has a low contact area. You MUST apply glue stick or bed adhesive to prevent it from detaching during the print.

⚙️ RECOMMENDED PRINT SETTINGS: • Printer: Creality K2 Plus (0.4mm Nozzle) • Profile: 0.12mm Standard • Wall Loops: 6 (Essential for strength) • Bed Temperature (PLA): 54°C (Increased from default 50°C for better stick) • Infill: 15-20% • Material: PLA, PLA+, or PETG • Supports: None

The Longest Zip Tie: 475mm Heavy Duty Fastener (K2 Plus)

0.12mm layer, 6 walls, 15% infill