IMPORTANT: This Croc Charm was designed for a toddler's croc (hole size 4.5mm, adult crocs have a hole size of 8mm)

If there is interest, I'd be happy to upload a version that works for adult crocs, but this one is for toddler crocs.

With that out of the way, let me introduce you to this minnie mouse croc charm/jibbitz for toddler shoes! We looked everywhere for croc charms that would fit our toddler's shoe, but couldn't find any. She adores Minnie Mouse, so we came up with this!

The SVG came from https://www.svgwaves.io/minnie-mouse (svgwaves io), and this was remixed according to the attribution below!

This was printed on a K2 Plus with CMS system, the pin was printed on a separate plate in black, and the head was printed in multi-color with a base of white and the top minnie mouse outline in pink.

A quick breakdown of the files attached to this project - the .3MF file is the standard head, which is painted how I printed it. Print is split into 2 plates because I printed the pin in black and the head in pink and white.

I've also uploaded the STLs separately:

The pin - the back of the croc charm, which is the same no matter what size tolerance you use for the head.

The standard head - built with tight tolerances to be a very tight fit with the pin to prevent our toddler from accidentally pulling the charm off

The loose head - a slightly more forgiving tolerance to the minnie mouse head, but. should work if the standard size head ends up being too tight of a fit after printing.

Recommendation is to stick with the standard head unless it doesn't fit.

This model is provided as is, and I'm not responsible for how you use it, please keep an eye on all children with small 3d-printed parts.

Printed in: PLA

Supports: No

Brim / Raft: No

Infill: 15%

Printer: K2 Plus w/ CMS

One last note, I tried to slice this in CrealityPrint to upload a Creality 3MF file, and it didn't seem to slice correctly, so I stuck to OrcaSlicer, which is what I primarily already used. The 3MF file attached is from OrcaSlicer.

Minnie Mouse Kids Croc Charm (Jibbitz)

0.2mm layer, 2 walls, 15% infill

Original