A Christmas tree with a lampshade inspired by the shape of the bamboo LED lamp. Originally, I wanted to make a light sculpture design, but for various reasons, I only kept the spiral light sculpture design at the bottom. It is recommended to use ABS or a harder material for the bracket and support it over a large area; otherwise, it may not be able to stand or print stably, like:

You need to:

2/3/4/5/6*2 magnets: 6 or 8 (8 if you want to install lights on top).

Small candle lamp / other light source. All kinds of light sources (diameter less than 4cm) 1 or 2 pcs, (provided, you can choose your favourite light source, I recommend a magnetron lamp or small candle) the same. I have reserved a small candle light position at the base, and I can stick magnets to the holes and candle lights to stabilise, and the top of the Christmas tree can also be glued to the lights, depending on whether you need a stronger light source or a better way to play and create atmosphere.

Sense of circumference.

The wall thickness of the bracket is more than 3mm to maintain hardness. The main body can be considered multi-coloured; I uploaded a multi-colour file, and the cumulative time is about 27 hours (P1S printer). All unsupported printing. My extension can be DIY, instructions:

我的扩展可以DIY，说明：

First, download your favourite Christmas model. Second, scale the size to match the size of the extension (the lower part is less than 2.7cm). Then, the objects are glued together by Boolean, using the example of Bambu Studio (OCRA similar) for reference https://wiki.bambulab.com/zh/software/bambu-studio/mesh-boolean.

picture

Next, you can engrave.

picture

Finally, colour (if you can print in multiple colours) and print. It is possible to switch the upper and lower gears by rotating 120 degrees and fix them, for a total of five gears.

If you don't want a stand, I'll then upload the lite version, which has a bracket-free design, but this version is not DIY. The assembly is relatively simple, so I won't upload the assembly instructions. Hopefully, it can add a sense of vibe to your Christmas. Commercial use is prohibited, and the second creation is welcome.

受bambu LED灯造型启发，设计的灯罩圣诞树

本来我想做一个光雕设计，但受各种原因只在底部保留了螺旋光雕设计

支架建议用ABS或更硬的材料，并大面积带支撑，不然可能架不住或打印不稳，就像：

你需要：

2/3/4/5/6*2磁铁6颗或8颗（如果你要在顶部也安装灯的话需要8颗）

小蜡烛灯/其他光源各类光源（直径小于4cm）1或2个，（已提供，你可以选择你喜欢的光源，我建议磁控灯或小蜡烛）同理

我在底座预留了小蜡烛灯位置，并可以在孔位和蜡烛灯上粘上磁铁以稳定，圣诞树顶也可以粘上灯，这取决于你需要更强的光源还是更好的玩法和氛

围感

支架壁厚3mm以上以保持硬度

主体可以考虑多色，我上传了多色文件，累计时间约27小时（P1S打印机）

全部无支撑打印

我的拓展组件可以DIY，操作说明：

首先，下载你喜欢的圣诞模型

其次，缩放尺寸，使其与拓展物件尺寸相配(下部尺寸小于2.7cm)

然后，通过布尔将物件粘连，以bambu studio（ocra类似）举例，参考https://wiki.bambulab.com/zh/software/bambu-studio/mesh-boolean

下一步，你可以刻字

最后，上色（如果你可以多色打印）并打印

可以通过旋转120度来切换上下的档位并固定，共五档位置

如果你不想要支架，我随后会上传lite版本，采用去支架设计，但此版本不能DIY

组装较为简单，我就不上传组装说明了

希望它可以为你的圣诞节增添氛围感

禁止商用，欢迎二创

Multi-gear glowing Christmas tree – a modern spiral aestheti

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill