camera mount for ender 3 V3 KE

New completelly adjustable camera mout.

Convenient placement. Easy print. Easy mout. Adjustable.

For standard version:

Support use same fixation as nebula pad (you will need 5mm longer M4 bolts) or there are a version of support for creality enclosure.

Remove screen support, change bolts for longer ones and fix support [part 1] and nebula pad together.

Mount bolt [2] and bush [3] with stem [4] and fix it on support [1] hole with nut [5].

Mount another bolt [2] and bush [3] on existing stem [4] and fix it on platform [6] hole.

Fix Nebula cam on platform [6] .

Adjust position as your preference.

Nut [5], Bolt [2] and bush [3] you will need 2 of each. Other parts print 1 of each.

For extended reach version (optional)

Extended reach version need more parts to be printed.

One more bush [3], stem [4] and nut [5].

You will need one clamp [7] and one longer bolt [8].

This extended version will increase the reach for the fron of printer and placement options will be almost infinite.

Stem [4] and bolts [2] and [8] should be printed horizontally for better stenght.

Other than that print is easy with few supports.

I used PETG for my parts because it is less brittle than PLA.

You can use my cable holder for wire organization

Compatible nebula pad cover:

https://www.crealitycloud.com/model-detail/6818f206bf737a7e52f16fc0?source=22

Nebula camera mount