Why can the "other brand" people enjoy this active dryer and not us?

Well, finally the nexus active dryer adapter is here!

The adapter is compatible with the Creality CFS and the Sunlu AMS Heater.

Bonus Feature!
I added to the design a 4-pocklet color swatch holder, so you keep track of what is inside.

Materials and Tolerances
Since I don't know which filament you will use, I made hole and peg tolerances very tight, as is non-existent. I figured that is always easier to remove material than adding glue. Try fitness first, and then use a fingernail file, a drill bit, or sandpaper, to make your joints tight.

Given the design of this active dryer, the hot air flow will be from the front to the back. Therefore you need the front as sealed as possible. With the nexus design with the cover snap-ons, it makes less-than-perfect seams between the main parts irrelevant. There is a seam "maze" created by the snap-on parts, which makes very difficult for humidity to walk-in in from the front. Eventually dust and wear will seal all of them shut.

You will need the original CFS cover metal rods. Read below !

Pre-Requisites: "CFS Unhinged"
For the full experience you will need to perform the steps outlined by Threed Jamming here:

(he will appreciate your likes!)

The step details are in the github
https://github.com/jamming3d/cfs-unhinged

**** NOTE: SAVE THE METAL RODS! You will need them

Final Thoughts
Finally, it is a long print, about 11 hrs total, but well worth it.

I am not a pro CAD designer, and this whole thing was put together in Tinkercad, believe it or not.

This model is free, but you can thank me by Boosting this model, if you like it! :-)

Nexus CFS Dryer Adapter

0.2mm layer, 2 walls, 10% infill