Why can the "other brand" people enjoy this active dryer and not us?

Well, finally the nexus active dryer adapter is here!

The adapter is compatible with the Creality CFS and the Sunlu AMS Heater.

Bonus Feature!
I added to the design a 4-pocket color swatch holder, so you can keep track of what filaments are loaded.

Materials and Tolerances
Since I don't know which filament you will use, I made hole and peg tolerances very tight, as is non-existent. I figured that is always easier to remove material than adding glue. Try fitness first, and then use a fingernail file, a drill bit, or sandpaper, to make your joints tight.

Given the design of this active dryer, hot air flow will be from the front to the back. Therefore you need to keep the front as sealed as possible. With the nexus design, with cover snap-ons it makes the loose seams between the main parts irrelevant. There is a seam "maze" created by the snap-on parts which makes very difficult for humidity to walk-in from the front. Eventually, dust and wear will seal all of them shut.

You will need the original CFS cover metal rods. Read below !

Pre-Requisites: "CFS Unhinged"
For the full experience you will need to perform the steps outlined by Threed Jamming here:

(he will appreciate your likes!)

The step details are in the github:

https://github.com/jamming3d/cfs-unhinged

**** NOTE: SAVE THE METAL RODS! You will need them

Final Thoughts
Finally, it is a long print, about 11 hrs total, but well worth it. I am not a pro CAD designer, and this whole thing was put together in Tinkercad, believe it or not.

Free model! If you like it, the best thank-you is a Boost: download or slice it first to unlock your Boost Ticket, then hit the Boost button on this page. Costs you nothing, and you get a lucky-draw chance too. Thanks! 🙂

Boost Me

Remember, you must download or slice the file first to unlock your platform boost ticket!

Boost

Nexus CFS Dryer Adapter

0.2mm layer, 2 walls, 10% infill