This beautiful Pillar Egg is a great easter gift or decoration for your home, your table or your garden.

It’s an easy to print in place model, suitable for beginners, no post-print assembly required. The socket belongs to the model and because of that no supports are needed and you are able to print the socket in another color by easily adding a manual color swap to the model. No multicolor printer needed.

If you like this model you should also have a look at my other Easter Egg designs:

Egg in the Egg

https://www.crealitycloud.com/model-detail/67d46bffe9388f39df5b3974

Infinity Egg

https://www.crealitycloud.com/model-detail/67d6780ba91322a91db48475

Feel free and print all of these!

Advantages

- Easy and fast to print, in just one piece. Slice and print.

- Ready to print, .stl and two .3mf (normal or with manual filament swap) included

- No supports needed

- You can use your preferred material and print in PLA, PETG, ABS a.s.o..

I needed approx. 2 hours 55 minutes to print it with my Creality K1C and approx. 37 g filament. 

For the displayed models I used Creality Wild Blossom L and 3D Jake ecoPLA Black.

Note: Full model height is 100 mm. You can scale it up according to your needs and printer size, but please don’t scale it down because this could damage the structure.

Pillar Egg, funny decoration, no supports needed, easy print

0.2mm layer, 2 walls, 15% infill