Professor X Chibi Figure 🧠🦸‍♂️

Add wisdom and mental power to your collection with this Professor X Chibi Figure in low‑poly style and a seated pose. Perfect for X-Men fans and collectors who enjoy 3D printing and hand painting.

🧠 Iconic design: Professor X with his wheelchair, serene expression and cute geometric style.

🎨 Great for hand painting: Optimized to print in one or a few colors and then painted with acrylics (skin tones, clothing and wheelchair details).

🧑‍🎨 Fully customizable: Suitable for realistic, cartoon or alternative finishes.

🎁 Perfect gift: Great for Marvel collectors, mutant fans and model painting enthusiasts.

🖨️ Printing recommendations

Recommended material: PLA or PLA+ (easy to print and good paint surface).

Supports: use supports only on critical areas (under chin, wheelchair parts and pronounced overhangs). Tree supports recommended to reduce surface marks.

Layer height: 0.12–0.20 mm (0.15 mm recommended).

Infill: 10–20% for a stable decorative piece.

Base color: skin tones, grey or black for the chair, or light grey/white if painting all details.

Post‑processing: light sanding on visible areas; primer before painting for better adhesion and finish.

Orientation tip: print with hips/legs and chair base on the bed for stability and minimal supports.

Professor X Chibi Figure 🧠🦸‍♂️

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill