The RippleFlow Pet Fountain by Cors Industries

Keep your furry friend happy, healthy, and hydrated with The RippleFlow Pet Fountain! Designed to encourage our cat Jordan to drink more, this 3D-printed fountain provides a continuous, fresh stream of water that cats and small dogs love.

The gentle, quiet flow is powered by a standard, low-voltage USB water pump, making it both energy-efficient and safe for your beloved pet. The multi-part design is easy to print, assemble, and, most importantly, easy to clean. All parts are designed to be printed with pet-safe filaments like PETG.

Give your pet the gift of fresh, flowing water. They'll love you for it!

Easy to print and assemble, you only need:

- white PETG (or another colour, as you wish);

- a 5V power supply with 5.5mm circular connector (https://www.amazon.it/Terryshop74-power-supply-Alimentatore-Universale/dp/B09B2PZ2JB);

- submersible pump (https://www.amazon.it/dp/B0B24G8WP7)

- 5.5mm adapter (https://www.amazon.it/kwmobile-10x-connettore-maschio-femmina/dp/B06XPVJT1Z).

How to assemble in the purrfect way:

- cut the pump USB cable at the end;

- put the + and the - of the cable in the 5.5mm adapter: pay attention to the polarity!

- insert the 5.5mm adapter in the hole of the bottom part of the purr fountain;

- insert the adapter tube on the pump;

- insert the pump in the top part of the purr fountain;

- fill the base with the water;

- close with the top part of the purr fountain;

- plug in the 5V power supply and enjoy!

We printed the top part with 42 holes, if you want the water to flow more slowly from the holes print with 30 or 18 holes.

The RippleFlow Pet Fountain

0.2mm layer, 2 walls, 20 infill

0.2mm layer, 2 walls, 15% infill