A Fix from the original Ratchet Fidget V1, a more simple and compact design, and easier printing and assembly!

Design Concept:

After the original Ratchet Fidget didn’t work, I designed a new, more compact, sleek design.

Print Settings:

15% Infill

2 Walls

No supports!

Printed on Creality K2 Plus

Assembly:

After printing, Align the pin above the slot in the base, and lightly tap repeatedly with a hammer/mallet/rock/dumbbell/club or whatever you use to pound things until it is fully secured into the socket.

Then, align one of the divers in the gear above the head of the pin, and snap onto the snap socket located on the base.

Apply slight pressure to the gear to start it turning.

You have successfully assembled the Ratchet Fidget V2!

Hope you enjoy!

Check out my other designs~

https://www.crealitycloud.com/user/9008057687?tab=0 <— Creality Cloud Link

https://www.***********.com/PrintForge_Official/designs <— Thingiverse Link

https://www.**********.com/@PrintForge_Official <— Printables Link

Ratchet Fidget V2

0.2mm layer, 2 walls, 15% infill