07-13款卡罗拉引擎盖支撑杆卡扣替代品 | Replacement Latch for 2007-2013 Corolla Hood Support Rod

>> 模型介绍 | Model Introduction >>>>>>>>

07-13款卡罗拉引擎盖支撑杆卡扣替代品 | Replacement Latch for 2007-2013 Corolla Hood Support Rod

没有能力手动造车，只好自己手动造汽车配件了。今天去做车辆保养，发现我的老爷车的引擎盖支撑杆收纳卡扣断了，简单量了一下大小，做个功能替代品装上去，感觉又行了，哈哈哈🤣。

While getting my car serviced today, I discovered that the latch of the hood support rod on my oldtimer had broken. After taking some quick measurements, I used a 3D printer to create a functional replacement and installed it. Feels like everything is back in order again, hahaha.

物件整体 Overall Design of the Object：X26mm*Y90mm*Z51.7mm

>> 打印配置 | Print Settings >>>>>>>>

（仅参考，可自定义）

(Referential, Customizable as Needed)

耗材 Filament：ABS

填充 Infill：50%

填充图案 Infill Pattern：直线 Straight Lines

支撑 Support：需要 Required

Brim/Raft: 仅外侧 Outer side only

>> 组装说明 | Assembly Instructions >>>>>>>>

即打即用，无需组装。

Print and Use Immediately; No Assembly Required.

>> 其他说明 | Additional Notes >>>>>>>>

1. 模型使用 Blender 4.2.5LTS制作。

2. 可根据协议 CC BY-NC-SA 4.0 自行修改为所需样式使用。

3. 无论如何，遇见是缘分，能用是巧合，留个言点个赞，关注收藏一起浪。

1. The model was created using Blender 4.2.5 LTS.

2. You are free to modify it as needed to suit your desired style under the terms of the CC BY-NC-SA 4.0 license.

3. Anyway, meeting is fate, being able to use it is coincidence. Leave a comment, give a like, follow and save, and let's ride this wave together.

>> 声明 | Statement >>>>>>>>

由于个人时间和精力有限，本人仅通过个人注册的平台和账号以及个人拥有的域名（PoweredBy.CN）发布模型相关信息。其他非个人注册、授权的平台和账号发布涉及到本人制作的模型图纸均与本人无关且涉嫌非法获利，本人保留追偿权利。本人在互联网上一直秉承着“自由分享，免费共享”的理念，对已公开发布的模型图纸不会以任何理由限制下载（包含但不限于收费制、会员制、积分制等限制），请注意甄别！

所有自造物件使用的知识共享许可协议：CC BY-NC-SA 4.0

Due to limited personal time and energy, I only release model-related information through platforms and accounts registered under my personal name, as well as the domain name owned by me (PoweredBy.CN). Any distribution of model drawings related to my work on platforms or accounts that are not personally registered or authorized is unrelated to me and may involve illegal profit-making. I reserve the right to seek compensation for damages. I have always adhered to the principle of "free sharing and open access" on the internet, and I will not impose any restrictions (including but not limited to paywalls, membership requirements, or point systems) on downloading publicly released model drawings. Please verify the authenticity of the source!

All self-made objects are licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).

Replacement Latch for 2007-2013 Corolla Hood Support Rod

0.2mm layer, 4 walls, 50% infill

0.2mm layer, 2 walls, 15% infill