This model is a remix of a model created by .

https://www.crealitycloud.com/user-profile/2563106973

The original was all one piece. I wanted to practice cutting up models for color printing so I chose this one because it's cute and adorable and awesome.

I removed each piece from the model and put them all on separate plates for easier color printing. You can scale up or down as needed, but the current scale is the most fun I think. Even though it's easier to print in color (without any need for a cfs, you can just swap) you will have to glue it together when it's done.

You can print the rocket and cloud and use them together if you don't want the lunar surface in there, but the lunar surface gives it some character. There are pins on the lunar part, and holes in the cloud so you can fit them together easily. The rocket exhaust is cut out of the cloud part and fits really well.

I added a pin to the top of the flame that will fit into the bottom of the rocket. The fins you'll have to glue on to the flat surfaces on the rocket. The rocket itself I painted in layers so that nothing overlaps (color wise) and you can just swap filaments if you want. You can also feel free to repaint anything to whatever colors you like. The window frames and windows are a pain to glue, but the separation cuts down printing time considerably.

In my print settings I bumped the infill of the rocket and exhaust parts up to 30%. You might need supports on the rocket, as the bottom where the engine is has a hole in it for the flames pin. Should be pretty self explanatory once you get it all printed.

Huge thank you to IESTAPen3D for the original model, and allowing for remixes. This was a challenge to cut up, but it looks sweet when printed.

IESTAPen3D can be found here: https://www.crealitycloud.com/user-profile/2563106973

Retro Rocket Lunar Leap

Rocket Lunar Leap - 0.2mm layer, 2 walls, 15% infill