Upgrade your server rack with this high-end 1U modular support specifically engineered for the Raspberry Pi 5.

This design focuses on two main pillars: Thermal Management and Durability. Unlike standard mounts, this model features a reinforced rear panel designed for a 40mm Noctua fan, providing the airflow needed when using high-performance NVMe shields.

I’ve integrated precision holes for M3 Brass Heat-Set Inserts, ensuring a professional assembly that won't strip over time. The front bezel provides a clean, industrial look while keeping all ports easily accessible.

Technical Specifications & B.O.M.

Hardware: 4x M3 Brass Heat-set inserts (3mm to 5mm length).

Fan Compatibility: 40mm fans (e.g., Noctua NF-A4x10 or NF-A4x20 5V).

SSD Support: Compatible with top and bottom NVMe Shields (up to 23mm total height).

Mounting: Standard M2.5 screws/standoffs for the Pi board.

Printing Recommendations (Creality Optimized)

Filament: PETG, ASA, or ABS (highly recommended for rack environments due to heat). High-temp PLA is also acceptable.

Layer Height: 0.2mm.

Infill: 20% (Grid or Gyroid for better structural integrity).

Wall Count: 3 or 4 walls to provide enough "meat" for the brass inserts.

Supports: "Touching Buildplate" only for the front port openings.

Assembly Steps

Thermal Inserts: Heat your soldering iron to ~200°C and gently press the M3 inserts into the 4 holes on the back of the main frame.

Cooling: Bolt the 40mm fan to the backplate using M3 screws.

Pi Install: Secure your Pi 5 into the base tray.

Finalize: Screw the back panel onto the main body.

Why this model?

I designed this because I wanted a rack solution that felt like professional IT equipment. The combination of the textured finish (if used with a PEI sheet) and the brass accents makes this a standout piece in any Home Lab.

RPi5 Pro Rack Mount 1U - Noctua & NVMe Edition

0.2mm layer, 2 walls, 15% infill