Throw away that metal scraper that came with your printer before you ruin your expensive build plate!

This plastic bed scraper is designed to have a sharp, wedge-like edge that easily slides under prints, but is soft enough to never scratch or gouge your PEI sheet, glass bed, or build-tak surface.

Key Features:

Bed-Safe: Made of plastic, so it won't damage your print surface.

Optimized Blade Angle: The front edge is angled perfectly to get underneath stubborn prints and pop them right off.

Ergonomic Handle: Comfortable to grip when you need to apply a little extra force.

Support-Free: Designed to print quickly and cleanly without any support material.

Printing Instructions:

Orientation: Crucial step! Print it flat on the bed. This aligns the layer lines parallel to the build plate, giving the blade maximum strength so it won't snap when prying off a print.

Material: PETG or ABS/ASA is highly recommended because they are slightly flexible and very durable. PLA works, but the edge might chip faster over time.

Infill: 20-30% (Grid or Gyroid).

Walls/Perimeters: Use 3 to 4 walls to make the blade edge solid plastic for maximum durability.

Safe Print Removal Scraper | No-Scratch Spatula

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill