Create your own modern ttrpg map with these wall tiles with raster, connecting walls in a configuration of your choice.

Both their sides are different, giving great variation when building.

Optional to keep the walls together on the top, you can use the wall connector.

I remixed the original tiles by resizing them and adding an Openlock triplex base you can click the tiles together in a limitless configuration of your choice. This way you can build the terrain easily and don't have to be scared the tiles get pushed around.

I added aditional beams, because I found that printing the big ones without them gives a very bad texture at the bottom. And if I put the time and money in tiles, I want them to be pretty and sturdy.

Instructions:

Print the tiles of your choice.

Remove the small supporting pins on the sides.

Print Openlock clips to connect the tiles.

Push one or more Openlock clips into the tiles (depending on the size of the tile 1 can be enough, 2 works best with big tiles).

Connect the tiles together.

Sci fi tiles - raster wall

0.2mm layer, 2 walls, 15% infill

Sci fi tiles - raster wall

Original