Remixed from Ralf Horhager - he also made a clamp for my Wen Drill Press which has a 73mm column.

There is a Ring circling the drill bit that allows as much debris as being removed as possible.

It attaches to a normal small size Ridgid shopvac for dust collection... will attach shortly an adapter to go from the clamp on the column to my 2.5" hose on my larger vacuum.

Recommend PETG 4 walls, Infill 20% Honeycomb for the clamp. I plan on printing 10 segments to be able to move around easier. 0.2/0.4mm quality.

====

*** YOU HAVE OPTIONS WITH THE RE-DESIGNED ADAPTERS....

#1: V2_Segmented-hose-inlet ---> I cut the narrowed end that went from 1.5 to 1.25" and that fits my next to Adapter to go directly to the Shop Vac:

#2: V2_Adapter for Drill Press Arm to Clamp ==> that's for the small Ridgid hose end of 44mm (and the cut segment I just did #1)

#3: V6_Adapter for Drill Press Arm to Clamp ==> that's for the large 2.5" Ridgid hose end of 58.5mm (and the cut segment #1)

BONUS: P.S.: add-on: you can check my other link for the re-design double end female Ridgid coupler 2.5" here where I made a 2.5" female adapter's coupler so you can leave one on the V6 version and just plus your hose directly into it!!

here is the link for it: https://www.crealitycloud.com/model-detail/ridgid-2-5-inch-female-union?source=22

Segmented Hose 40mm (1.5" ID) to Ridgid 2.5” Dust Collector

0.2mm layer, 2 walls, 15% infill