Summary
This is a model of a Shelby AC Cobra 427 in a kit card style. Some characteristic details can be discovered.
After printing, the model can be assembled with the help of integrated connectors.
The wheels can be turned, but the car will not roll.

Versions
The complete set is available in a STL file for a one-color print.
There is a 3MF-file with predefined colors intended for users of AMS or MMU.
Otherwise, the body, tires and rims and the tires must be printed separately.

Print
Print with 0.15 layer hight or lower to bring up the details.
No supports are needed.
Use 3 perimeters and 10% infill.

Post processing
The small struts can be removed really quickly and cleanly using a side cutter.
Please remove the predesigned supports under the front axle.

Assembly
The kit is easy to assemble. All parts fit together very well.
If a part should be loose, superglue can be used.

Dimensions
The fully assembled model has the following dimensions
Height: 51mm
Depth: 165mm
Width: 71.5mm

The complete kit card has the following dimensions when printed
Height: 40mm
Depth: 182mm
Width: 123mm
Scaling will work in a low range due to the tolerances.

Other models
I will also try to publish other car models. Stay tuned!

I hope you had as much fun printing and assembling it as I did :-)

Do you like my work? I would be very happy if you would support my work on Ko-fi.

Differences of the remix compared to the original

model assembled from seperated parts
redesigned exhausts
connectors added
connected in kit card style and framed
painted for AMS / MMU

Shelby AC Cobra 427 Kit Card (1:24 scale)

0.2mm layer, 2 walls, 15% infill

Original