🛠️ Simple Blade Bed Scraper — The Ultimate Mini Mighty Tool!
Ever had a stubborn print that just refused to let go of your build plate? Before you reach for a metal spatula and risk gouging your expensive PEI or glass bed, meet your new best friend.

This scraper might be small and simple, but it is hands-down the most effective bed scraping tool you will ever throw on your print bed!

🚀 Why This Print belongs on Your Build Plate
⚡ Micro Print Time: Clocks in at just ~10 minutes on high-speed machines like the K2!
🪶 Featherlight Filament Saver: Uses a mere 2.9g of filament. It’s the perfect, ultra-low-risk way to use up those annoying last few meters on a spool.
🎯 Zero-Damage Wedging: The precision-angled edge is engineered perfectly to slide effortlessly beneath stubborn prime lines, skirts, or stuck prints without scratching your bed coatings.
🎒 Pocket-Sized & Packable: Its compact footprint means it won't clutter your workbench. Toss it in a drawer, stick it in a tool grid, or keep it right next to your printer frame.
🎨 Custom Style: It prints so fast you can easily churn out a matching set in all your favorite accent colors.

⚙️ Recommended Print Settings
Maximize your success right off the plate with these optimized specs:

Layer Height: 0.2mm
Perimeters/Walls: 2 walls
Infill: 15%
Filament: PLA (or PETG if you want a tiny bit more flex!)

💡 Pro Usage Tips
👋 Keep it Smooth: To get the best results, use a low, flat angle and a slow, controlled sliding motion. Let the fine edge do the lifting for you!

It uses a standard single sided blade as per additional picture (Be careful inserting - Position and press against hard surface (No glue needed):

Simple Blade Bed Scraper

0.2mm layer, 2 walls, 15% infill