*Update

Due to a recent enquiry, I've added new version of the bracket to hopefully suite most 10" skateboard decks. This bracket is 50mm longer than the original (now 268mm long). I sliced it on a K2 plate due to its size for the WMF upload.

Please note, I have not printed this version as it exceeds the range of my printer.

Let me know if it fits or need a tweak

Cheers

Design Concept

I designed this bracket to be a simple solution for wall mounting of Skateboards presenting the deck graphics outward for artistic appeal whilst maintaining easy functionality for mounting/un-mounting the skateboard.

Both left and right-handed versions of the mount have been included

Print Settings

Printed on Creality Ender V3 SE,14.49 hrs, 76.5m, 230g

Creatility PLA, layer height 0.2mm, walls 4, infill density 40% Gyroid, no supports, Ironing all top surfaces, default print speeds

Consider your installation environment and filament selection, if installing in areas with ambient temperatures +40 degrees Celsius, PLA is not likely your suitable solution. Suggest selecting a filament with higher heat deflection temperature performance properties.

Assembly

- Consider the location which the bracket will be installed ensuring no person, pets or items of importance frequent the area located directly below the mounting bracket.

- Set bracket on wall with adequate clearance to load the skateboard into the mount from the side

- Ensure bracket is level

- Screw to wall using appropriate fasteners and fixings to support the bracket and skateboard weight

- Install blanking plug in screw hole at the front of the bracket, a light tap wit hammer may be required.

- Enjoy!

Skateboard Vertical Wall Mount - Art Outward

0.2mm layer, 4 walls, 140% infill

0.2mm layer, 2 walls, 15% infill